Trunk recently began offering the Ring Jacket for customization alongside its existing Made-in-Italy line. Ring’s Japanese brand is a step up in quality, and at £2010 for a suit this means it offers the same range as Anglo-Italian (from £1980), Bryceland’s (from £2300) and others.

Bryceland’s line is more handcrafted and a bit more stylized than the others, but I can see readers considering this in Trunk alongside Anglo or Thom Sweeney or Saman Amel.

One difference is that the Ring Jacket offering is based in part on trunk shows. The team comes from Japan twice a year and after one meeting to take action, the suits are delivered to the store and a second appointment is made with the trunk staff. So my next visit, albeit a bit more limited, will be soon, on April 17th and 18th.

I tried the service late last year and met Mr. Sasamoto of Ring Jacket at a trunk show. I wanted to replace the brown high twist suit I had. Created by Dalcuore A few years ago – it’s so small now – this was a great opportunity to do that.

My previous suit was made from Holland & Sherry’s Crispaire fabric, but I’ve since found that I prefer the slightly drier, sharper Ascot from Drapers.my assisi suit (Made in 4-ply.) Unfortunately, the dark brown color of the 4-ply fabric that I liked has been discontinued, so I upped the weight to 6-ply fabric. It was an interesting opportunity to try a higher twist suit in a heavier and in some ways more traditional weight.

Mr. Sasamoto was picky about measurements and consultations, which was not surprising since I had seen him at work before. Visit to Japanese ring jacket factory Again in 2018.

I also tried on a sample suit to help gauge the style. This is a very soft round-shouldered look that feels like the culmination of ‘Steel Italiano’, the common Japanese name for the popular wave of Neapolitan fashion since the 2010s.

Its soft shoulder shape will appeal to many readers. It feels like a less corporate business suit, but it’s easy-to-wear tailoring, with soft jackets made from cashmere or cord that can be worn with jeans or more casual trousers.

I could have updated the cut by lowering the button point about an inch, which I think is fine. However, the style is limited in terms of the lapels, which must maintain this width and notch height. Some readers who tend to prefer wider lapels or lower notches may find this a bit limiting. It’s important to note that the same restrictions often apply to other users as well. together.

When it arrived, I was pleased with the fit of the suit, which struck a good balance between comfort and form. I tend to prefer a slightly loose fit these days, so I was a little worried that it would be tight, but in reality, the waist and leg lines of the pants were a little looser. The Trunk team does this in London so it will be ready within a few days.

I put belt loops on my pants. Because while you can wear this suit with a tie, as pictured, you’ll often wear it with an open-neck shirt or even a knit, and the belt will add interest.

This decision is always a bit of a compromise and sometimes not an easy one. But the key I’ve found is to consider how often you wear the suit this way, and how often you wear the pants themselves. Weigh it and accept compromises.

The fit of the suit was very good. Of course, it’s not at the level of customization, but the customization was really nice. The collar is close to the neck, the sleeve pitch is perfect, and the jacket balance is very good.

The lower right shoulder and generally slanted shoulder also coped quite well. Some custom tailors also have trouble keeping the right sides clean, but Ring Jacket did a great job. There’s a little more creasing between the blades and under the arms than the best custom pieces, but that’s about it.

There are also products that you may want for the price. Featuring hand-applied collars and sleeves, precision finishing, and buttonholes. The Ling team has done a lot of work at the factory to improve the shape of the jacket.

If a friend were to ask me the best place to measure in London, this would definitely be one of the options I would suggest. Having to wait for a trunk show is one limitation, but beyond that it’s mostly a matter of style compared to places like Anglo-Italian and prices are about the same as Saman or Thom Sweeney.

Bryceland’s is more expensive, but the level of build is closer to bespoke, so it’s better to compare it to Saman’s Napoli line and Jean-Manuel Moreau, which cost around £3500 and £3000 respectively.

Like Anglo and Bryceland, Trunk also has the advantage of always having a friendly team in store and, as a result, a loyal customer base. This service is especially attractive to existing Trunk customers.

Made for Ring Jacket Details Measurements:

• Suits – from £2010
• Jackets – from £1490
• Pants – from £540
• Trunk shows occur twice a year, with the next show taking place April 17-18.
• Delivered to store in about 4 months
• If you make a reservation on the trunk site here.
• Customization is also available, starting from £1800.

The trunk also provides:

• Custom made with Caruso in Italy (suits from £1750)
• Italian trunk brands MTM and MTO (suits £1350 and £1200 respectively)
• Both are low level, but have the advantage of not requiring a trunk show.

Clothing pictured:

• Drapers high twist wool suit, 6 layers, 510g, 18056 From the Ascot flock
• Lilac cotton-twill shirt by Simone Abbarchi
• Church’s knit cashmere tie
• London grained-leather Piccadilly loafers by Edward Green